Tutorial

BIDS introduction and BIDScoin demo

A good starting point to learn more about BIDS and BIDScoin is to watch this presentation from the OpenMR Benelux 2020 meeting (slides). The first 14 minutes Robert Oostenveld provides a general overview of the BIDS standard, after which Marcel Zwiers presents the design of BIDScoin and demonstrates hands-on how you can use it to convert a dataset to BIDS.

BIDScoin tutorial

The tutorial below was written for an older version of BIDScoin with the DCCN user in mind. Nevertheless, the main principles still apply, and you are encouraged to try out the assignments

1. Setting up the environment

Depending on how BIDScoin was installed, you may have to set your Python environment settings before you can run BIDScoin commands from your command-line interface / shell. In the DCCN compute cluster example below it is assumed that an environment module is used to load your Linux Anaconda Python installation and that BIDScoin is installed in a conda environment named “bidscoin”. Run or adjust these commands to your computer system if needed:

$ module add bidscoin                # Load the DCCN bidscoin module with the PATH settings and Anaconda environment
$ source activate /opt/bidscoin      # Activate the Python virtual environment with the BIDScoin Python packages

Now you should be able to execute BIDScoin commands. Test this by running bidscoin to get a general workflow overview. Can you generate a list of all BIDScoin tools? What about the plugins?

2. Data preparation

Create a tutorial playground folder by executing these shell commands:

$ bidscoin --download .              # Download the tutorial data (use a "." for the current folder or a pathname of choice to save it elsewhere)
$ cd ./bidscointutorial              # Go to the downloaded data (replace "." with the full pathname if your data was saved elsewhere)

The new bidscointutorial folder contains a raw source-data folder and a bids_ref reference BIDS folder, i.e. the intended end product of this tutorial. In the raw folder you will find these DICOM series (aka “runs”):

001-localizer_32ch-head                  A localizer scan that is not scientifically relevant and can be left out of the BIDS dataset
002-AAHead_Scout_32ch-head               A localizer scan that is not scientifically relevant and can be left out of the BIDS dataset
007-t1_mprage_sag_ipat2_1p0iso           An anatomical T1-weighted scan
047-cmrr_2p4iso_mb8_TR0700_SBRef         A single-band reference scan of the subsequent multi-band functional MRI scan
048-cmrr_2p4iso_mb8_TR0700               A multi-band functional MRI scan
049-field_map_2p4iso                     The field-map magnitude images of the first and second echo. Set as "magnitude1", bidscoiner will recognize the format. This field map is intended for the previous functional MRI scan
050-field_map_2p4iso                     The field-map phase difference image of the first and second echo
059-cmrr_2p5iso_mb3me3_TR1500_SBRef      A single-band reference scan of the subsequent multi-echo functional MRI scan
060-cmrr_2p5iso_mb3me3_TR1500            A multi-band multi-echo functional MRI scan
061-field_map_2p5iso                     Idem, the field-map magnitude images of the first and second echo, intended for the previous functional MRI scan
062-field_map_2p5iso                     Idem, the field-map phase difference image of the first and second echo

Let’s begin with inspecting this new raw data collection:

  • Are the DICOM files for all the bids/sub-* folders organized in series-subfolders (e.g. sub-001/ses-01/003-T1MPRAGE/0001.dcm etc)? Use dicomsort if this is not the case (hint: it’s not the case). A help text for all BIDScoin tools is available by running the tool with the -h flag (e.g. rawmapper -h)

  • Use the rawmapper command to print out the DICOM values of the “EchoTime”, “Sex” and “AcquisitionDate” of the fMRI series in the raw folder

3. BIDS mapping

Now we can make a study bidsmap, i.e. the mapping from DICOM source-files to BIDS target-files. To that end, scan all folders in the raw data collection by running the bidsmapper command:

$ bidsmapper raw bids

  • In the GUI that appears at the end, edit the task and acquisition labels of the functional scans into something more readable, e.g. task-Reward for the acq-mb8 scans and task-Stop for the acq-mb3me3 scans. Also make the name of the T1 scan more user friendly, e.g. by naming the acquisition label simply acq-mprage.

  • Add a search pattern to the IntendedFor field such that the first field map will select your Reward runs and the second field map your Stop runs (see the bidseditor field map notes for more details)

  • Since for this dataset we only have one session per subject, remove the session label (and note how the output names simplify, omitting the session subfolders and labels)

  • When all done, go to the Options tab and change the dcm2niix settings to get non-zipped NIfTI output data (i.e. *.nii instead of *.nii.gz). Test the tool to see if it can run and, as a final step, save your bidsmap. You can always go back later to change any of your edits by running the bidseditor command line tool directly. Try that.

4. BIDS coining

The next step, converting the source data into a BIDS collection, is very simple to do (and can be repeated whenever new data has come in). To do this run the bidscoiner command-line tool (note that the input is the same as for the bidsmapper):

$ bidscoiner raw bids

  • Check your bids/code/bidscoin/bidscoiner.log (the complete terminal output) and bids/code/bidscoin/bidscoiner.errors (the summary that is also printed at the end) files for any errors or warnings. You shouldn’t have any :-)

  • Compare the results in your bids/sub-* subject folders with the in bids_ref reference result. Are the file and folder names the same (don’t worry about the multi-echo images and the extra_data images, they are combined/generated as described below)? Also check the json sidecar files of the field maps. Do they have the right EchoTime and IntendedFor fields?

  • What happens if you re-run the bidscoiner command? Are the same subjects processed again? Re-run sub-001.

5. Finishing up

Now that you have converted the data to BIDS, you still need to do some manual work to make it fully ready for data analysis and sharing

  • Combine the echos using the echocombine tool, such that the individual echo images are replaced by the echo-combined image

  • Deface the anatomical scans using the deface tool. This will take a while, but will obviously not work well for our phantom dataset. Therefore store the ‘defaced’ output in the derivatives folder (instead of e.g. overwriting the existing images)

  • Inspect the bids/participants.tsv file and decide if it is ok.

  • Update the dataset_description.json and README files in your bids folder

  • As a final step, run the bids-validator on your ~/bids_tutorial folder. Are you completely ready now to share this dataset?